hdigi-met.jpg (1955 bytes)

SF-3000 Digital Satellite Finder
*** Can be used to locate satellites without TV or Receiver ***

 
  • All parameters (ie. LO, SR, L, F, LNB, 22KHz, and QPSK) must be inputted to locate a satellite.
  • SF-3000 is pre-set with ~40 sets of satellite parameters including different azimuth, elevation, and polarization for each specific satellite.
  • You can also key-in other satellite parameters that is suitable for your area, or  use a PC to download information onto the meter.
  • In addition, a software will come with the SF-3000 to provide more satellite parameters available for downloading.
  • It can store up to 80 sets of parameters.
  • Once all the information point towards one specific satellite, the meter will have a beeping sound to indicate the satellite is located.

SF-210 Dual Digital Satellite Meter & its Accessories

SF-210Dual Digital Satellite Meter
click here to see its specification

sf-201-accessory.jpg (17265 bytes)

DishPro Splitters

DP-1002D - 2 Way
DishPro Diode Steered Splitter

5-2400MHz, used for 1 single DisPro LNBF (D-300S) and 2 DishPro receivers (Dish301, DishPVR 501, DishPVR 508, and DishPVR 721)

DP-1003D - 3 Way
DishPro Diode Steered Splitter

5-2400MHz, used for 1 single DisPro LNBF (D-300S) and 3 DishPro receivers (Dish301, DishPVR 501, DishPVR 508, and DishPVR 721)

DishPro Splitters

DP-1002 - 2 Way DishPro Splitter
(one way power pass)

5-2400MHz, used for 1 single DisPro LNBF (D-300S) and 2 DishPro receivers (Dish301, DishPVR 501, DishPVR 508, and DishPVR 721)

DP-1003 - 3 Way DishPro Splitter
(one way power pass)

5-2400MHz, used for 1 single DisPro LNBF (D-300S) and 3 DishPro receivers (Dish301, DishPVR 501, DishPVR 508, and DishPVR 721)

Satellite  Finder

Angle Level

Map Compass

C/KU Band O.M.T.

H to H Motorize Mount

Polarizer

Offset   Dish

Angle Level

AC Adaptor

Royal - 3

Marine Mount

MD - 177

LA - 99

la99.jpg (7940 個位元組)

1002D

1002C

spt1002d.jpg (10312 個位元組)

SW-1418T

1004

sw-1418t.jpg (26213 bytes)
Model No. SW-1418T
14/18V LNB Switch
Freq.: 40-2200 MHz
Input: 2 LNB        Output: 1 RX
500 Watt Peak
Cooling by air fan.

spt1004.jpg (9783 個位元組)

1004C

1004D

spt1004c.jpg (11094 個位元組)

spt1004c.jpg (11094 個位元組)

3010

3220

tap3010.jpg (9458 個位元組)

tap3220.jpg (9857 個位元組)

3402

3407

equ3402.jpg (10494 個位元組)

inj3407.jpg (5903 個位元組)

F - 71

F - 56KH

con3517.jpg (4764 個位元組)

F- 56-PS

F- 56-PS

F - 56 - SG

F - 56 - G

f-56-sg.jpg (17115 bytes)

f-56-g.jpg (17260 bytes)

KS - 50 (CX - 1012A)

SW - 22

KS-50.JPG (12929 bytes)

SW-22: 0/22KHz Controlled Selector Switch

SF-1000 - Signal Meter

SF-1000 - Signal Meter

sf-1000.JPG (34333 bytes)


sf-1000a.JPG (17757 bytes)

Flat Cable FC-088

RS-232 Cross Pin Cable

FC-088 Flat Cable F-(f) to F-(f)
Extremely flat and flexible version.
No drilling work, self-sticking and weatherproof.




Used for PC--Receiver & Receiver--Receiver Software Transfer. This is the cable wire that you use along with all MRX-receivers. This is a null modem cable.

mailto:peterchen@microyal.com